Sea container
A 10 ft standard container holds 4 GMA pallets, all in one layer. Two layers need 2.44 m and the inside is 2.40 m high, so stacking adds none. Each pallet is assumed 1.22 m high with its load and 525 kg.
| GMA pallets | One layer | Stacked two high |
|---|---|---|
| Pallets | 4 | 4 |
| Limited by | Space | Space |
| Floor used | 74% | 74% |
| Weight loaded | 2,100 kg | 2,100 kg |
Assumptions
| Pallet | One layer | Stacked two high |
|---|---|---|
| Euro pallets | 5 | 5 |
| industrial pallets | 4 | 4 |
| half pallets | 11 | 22 |
| Unit | One layer | Stacked two high |
|---|---|---|
| 20 ft standard container | 9 | 9 |
| 40 ft standard container | 20 | 20 |
| 40 ft high cube container | 20 | 40 |
| 45 ft high cube container | 24 | 48 |
| 20 ft reefer container | 9 | 9 |
| 40 ft high cube reefer container | 20 | 40 |
| 40 ft reefer container | 20 | 20 |
| 20 ft open top container | 9 | 9 |
| 40 ft open top container | 20 | 20 |
| 53 ft dry van trailer | 30 | 38Payload |
| 26 ft box truck | 11Payload | 11Payload |
Not in this unit. Two layers need 2.44 m and the inside is 2.40 m high, so the count stays at 4.
The counts assume 1.22 m and 525 kg a pallet. At that weight the 10,640 kg payload carries at most 20 pallets. A pallet taller than 1.19 m cannot go two high, because the inside is 2.40 m high. Enter your own sizes in the Container loading calculator.
4 GMA pallets of 1,219 × 1,016 mm cover 5 m² of the 6.7 m² floor, which is 74%. The rest is gaps and strips too narrow for another pallet.
Paste your packing list, press Calculate and see how every piece goes in.