Road equipment
A 3.5 t panel van holds 2 industrial pallets. The 1,100 kg payload stops the load before the floor is full, so stacking adds none. Each pallet is assumed 1.20 m high with its load and 500 kg.
| industrial pallets | One layer | Stacked two high |
|---|---|---|
| Pallets | 2 | 2 |
| Limited by | Payload | Payload |
| Floor used | 30% | 30% |
| Loading metres (LDM) | 1.00 | 1.00 |
| Weight loaded | 1,000 kg | 1,000 kg |
Assumptions
| Pallet | One layer | Stacked two high |
|---|---|---|
| Euro pallets | 2Payload | 2Payload |
| half pallets | 6Payload | 6Payload |
| Unit | One layer | Stacked two high |
|---|---|---|
| 10 ft standard container | 4 | 4 |
| 20 ft standard container | 9 | 9 |
| 40 ft standard container | 22 | 22 |
| 40 ft high cube container | 22 | 44 |
| 45 ft high cube container | 24 | 48 |
| 20 ft reefer container | 9 | 9 |
| 40 ft high cube reefer container | 20 | 40 |
| 40 ft reefer container | 20 | 20 |
| 20 ft open top container | 9 | 9 |
| 40 ft open top container | 22 | 22 |
| 13.6 m curtainsider trailer | 26 | 48Payload |
| 13.6 m box trailer | 26 | 48Payload |
| 13.6 m mega trailer | 26 | 48Payload |
| 7.5 t box truck | 5Payload | 5Payload |
| 7.45 m BDF swap body | 14 | 28 |
| 7.82 m BDF swap body | 14 | 26Payload |
It would not add any. The 1,100 kg payload runs out at 2 pallets, so a second layer adds none.
The counts assume 1.20 m and 500 kg a pallet. At that weight the 1,100 kg payload carries at most 2 pallets. A pallet taller than 1.00 m cannot go two high, because the inside is 2.01 m high. Enter your own sizes in the Loading meter calculator.
2 industrial pallets in one layer take 1.00 loading metres, 30% of the floor. Stacking adds none here.
Paste your packing list, press Calculate and see how every piece goes in.