Road equipment
A 7.82 m BDF swap body holds 14 industrial pallets in one layer and 26 stacked two high. The 13,000 kg payload sets the limit. Each pallet is assumed 1.20 m high with its load and 500 kg.
| industrial pallets | One layer | Stacked two high |
|---|---|---|
| Pallets | 14 | 26 |
| Limited by | Space | Payload |
| Floor used | 88% | 88% |
| Loading metres (LDM) | 7.00 | 7.00 |
| Weight loaded | 7,000 kg | 13,000 kg |
Assumptions
| Pallet | One layer | Stacked two high |
|---|---|---|
| Euro pallets | 18 | 32Payload |
| half pallets | 36 | 72 |
| Unit | One layer | Stacked two high |
|---|---|---|
| 10 ft standard container | 4 | 4 |
| 20 ft standard container | 9 | 9 |
| 40 ft standard container | 22 | 22 |
| 40 ft high cube container | 22 | 44 |
| 45 ft high cube container | 24 | 48 |
| 20 ft reefer container | 9 | 9 |
| 40 ft high cube reefer container | 20 | 40 |
| 40 ft reefer container | 20 | 20 |
| 20 ft open top container | 9 | 9 |
| 40 ft open top container | 22 | 22 |
| 13.6 m curtainsider trailer | 26 | 48Payload |
| 13.6 m box trailer | 26 | 48Payload |
| 13.6 m mega trailer | 26 | 48Payload |
| 7.5 t box truck | 5Payload | 5Payload |
| 3.5 t panel van | 2Payload | 2Payload |
| 7.45 m BDF swap body | 14 | 28 |
Only if the goods and the pallets can carry the weight above them. Where they can, two layers fit 26 instead of 14.
The counts assume 1.20 m and 500 kg a pallet. At that weight the 13,000 kg payload carries at most 26 pallets. A pallet taller than 1.35 m cannot go two high, because the inside is 2.70 m high. Enter your own sizes in the Loading meter calculator.
14 industrial pallets in one layer take 7.00 loading metres, 88% of the floor. Stacked two high, 26 pallets take 7.00 LDM.
Paste your packing list, press Calculate and see how every piece goes in.