Sea container
A 40 ft reefer container holds 20 industrial pallets, all in one layer. Two layers need 2.40 m and the inside is 2.23 m high, so stacking adds none. Each pallet is assumed 1.20 m high with its load and 500 kg.
| industrial pallets | One layer | Stacked two high |
|---|---|---|
| Pallets | 20 | 20 |
| Limited by | Space | Space |
| Floor used | 91% | 91% |
| Weight loaded | 10,000 kg | 10,000 kg |
Assumptions
| Pallet | One layer | Stacked two high |
|---|---|---|
| Euro pallets | 23 | 23 |
| half pallets | 52 | 104 |
| GMA pallets | 20 | 20 |
| Unit | One layer | Stacked two high |
|---|---|---|
| 10 ft standard container | 4 | 4 |
| 20 ft standard container | 9 | 9 |
| 40 ft standard container | 22 | 22 |
| 40 ft high cube container | 22 | 44 |
| 45 ft high cube container | 24 | 48 |
| 20 ft reefer container | 9 | 9 |
| 40 ft high cube reefer container | 20 | 40 |
| 20 ft open top container | 9 | 9 |
| 40 ft open top container | 22 | 22 |
| 13.6 m curtainsider trailer | 26 | 48Payload |
| 13.6 m box trailer | 26 | 48Payload |
| 13.6 m mega trailer | 26 | 48Payload |
| 7.5 t box truck | 5Payload | 5Payload |
| 3.5 t panel van | 2Payload | 2Payload |
| 7.45 m BDF swap body | 14 | 28 |
| 7.82 m BDF swap body | 14 | 26Payload |
Not in this unit. Two layers need 2.40 m and the inside is 2.23 m high, so the count stays at 20.
The counts assume 1.20 m and 500 kg a pallet. At that weight the 26,130 kg payload carries at most 52 pallets. A pallet taller than 1.11 m cannot go two high, because the inside is 2.23 m high. Enter your own sizes in the Container loading calculator.
20 industrial pallets of 1,200 × 1,000 mm cover 24 m² of the 26.4 m² floor, which is 91%. The rest is gaps and strips too narrow for another pallet.
Paste your packing list, press Calculate and see how every piece goes in.